Enterasys X-Pedition XSR, Справочное руководство CLI

Страница: 640 / 684

AAA Usergroup Commands
16-96 Configuring Security
Syntax of the “no” Form
The no form unlinks a pool of addresses from a group of users:
no ip pool pool-name
Mode
Usergroup configuration:
XSR(aaa-group)#
Example
The following example adds the IP pool denver :
XSR(config)#aaa group headquarters
XSR(aaa-group)#ip pool denver
pptp encrypt mppe
This command enables Microsoft Point ‐ to ‐ Point Encryption (MPPE) on a PPTP connection. The
command must be added to the interface that will carry PPTP ‐ MPPE traffic. All Windows clients
using MPPE require MS ‐ CHAP.
Syntax
pptp encrypt mppe { auto | 40 | 128 }
Syntax of the “no” Form
The no form of this command disables MPPE encryption:
no pptp encrypt mppe
Default
128 ‐ bit encryption
Mode
Usergroup configuration:
XSR(aaa-group)#
Example
The following example enables MPPE with auto encryption:
XSR(config)#aaa group
XSR(aaa-group)#pptp encrypt mppe auto
Note: All configurable MPPE options must be identical on both tunnel endpoints.
auto
Offers 40 ‐ and 128 ‐ bit encryption strength if available.
40
Only 40 ‐ bit encryption allowed.
128
Only 128 ‐ bit encryption allowed.