Enterasys X-Pedition XSR, Справочное руководство CLI

Страница: 44 / 684

snmp-server Commands
1-30 Network Management
Syntax of the “no” Form
Use the no form of this command to remove a user:
no snmp-server user username groupname { v1 | v2c | v3 }
Mode
Global configuration:
XSR(config)#
Example
The example below configures ljc of the v3authgrp SNMP group with strong v3 level security, MD5
authentication, and the password acorntree :
XSR(config)#snmp-server user ljc v3 auth v3authgrp md5 acorntree
snmp-server view
This command creates or updates a view entry. The XSR provides one default view which is used
for all community commands which do not specify a view parameter. The v1default view includes
the internet tree and excludes snmpUsmMIB and snmpVacmMIB . You can remove this view with
the
no snmp-server v1default
command.
Syntax
snmp-server view view-name { oid-tree | treeEntryName } { included | excluded }
Syntax of the “no” Form
Use the no form of this command to remove a view entry:
no snmp-server view view-name
sha
HMAC SHA algorithm used for authentication.
auth-password
The user’s authentication password. At least 8 characters is required.
priv
Specifies the privacy setting.
des56
CBC ‐ DES privacy encryption algorithm.
priv-password
Privacy password for the user. A minimum of 8 characters is required.
access
Specifies an access ‐ list associated to this user.
access-list
Standard IP access ‐ list allowing access to this user.
view-name
Label for the view record that you update/create.
oid-tree
Object identifier of the subtree to be included/excluded from the view.
This parameter can be either a numeric OID or a well ‐ known MIB name
listed in Table 1 ‐ 2 on page 1 ‐ 31, or a MIB name followed by a numeric
OID (i.e., system.6 for sysLocation ). Names are case ‐ sensitive.
treeEntryName
Name of the sub ‐ tree equivalent to the object OID tree.
included
This view includes the specified OID tree.
excluded
This view excludes the specified OID tree.