Enterasys X-Pedition XSR, Справочное руководство CLI

Страница: 15 / 684

XSR CLI Reference Guide 1-1
1
Network Management
Observing Syntax and Conventions
The CLI Syntax and conventions use the notation described in the following table.
Network Management Commands
This chapter includes the following subsets of network management commands:
• “General Network Management Commands” on page 1 ‐ 2
• “General Show Commands” on page 1 ‐ 14
• “snmp ‐ server Commands” on page 1 ‐ 16
• “SNMP Show Commands” on page 1 ‐ 34
• “SLA Agent Commands” on page 1 ‐ 37
• “RTR ‐ mode Commands” on page 1 ‐ 43
• “RTR Show Commands” on page 1 ‐ 45
Convention Description
xyz Key word or mandatory parameters ( bold )
[ x ] [ ] Square brackets indicate an optional parameter ( italic )
[ x | y | z ] [ | ] Square brackets with vertical bar indicate a choice of values
{ x | y | z } { | } Braces with vertical bar indicate a choice of a required value
[ x { y | z } ] [{ | } ] Combination of square brackets with braces and vertical bars
indicates a required choice of an optional parameter
(config ‐ if< xx> ) xx signifies interface type and number, e.g.: F1 , S2/1.0 , D1 , M57 ,
G3 . F indicates a FastEthernet, and G a GigabitEthernet interface.
Next Mode entries display the CLI prompt after a command is entered.
Sub ‐ command headings are displayed in red text.
soho.enterasys.com Italicized, non-syntactic text indicates either a user-specified entry or text with
special emphasis