Configuration
Entek IRD 6666 and 6667 Protection Monitors
35
2.
To set the first alarm map, select ALM MAP.
3.
To set up the first combination (alarm map), select ALM1MAP.
4.
To set the first source in ALM1MAP, select ALMSRC1. Note that this menu might
contain additional source options.
The first source for ALM1MAP is the channel 1 Alert alarm.
5.
Select ALM1 1 (alarm map 1, source 1) and set it to ALERT.
6.
Select SRC NUM and set it to 1 for channel 1.
7.
Since you are combining the sources with an AND, select COMBINE and set it to
AND.
You have now set the first half of the first equation:
relay 2 = channel 1 Alert AND source 2
You now need to set the second source.
8.
Select EXIT.
RLY MAP
FAILSAFE
EXIT
ALM MAP
SET
ALM2MAP
ALM3MAP
ALM4MAP
ALM5MAP
ALM6MAP
EXIT
ALM1MAP
SET
EXIT
ALMSRC1
SET
SRC NUM
1
COMBINE
AND
EXIT
SET
ALM1 1
ALERT
