Configuration
Entek IRD 6652 DSP Protection Monitor
33
ANALYSE submenu
The ANALYSE submenu has the following options:
The ANALYSE submenu has the following structure.
Factory menu
→
ANALYSE
TREND 2
PROCESS
TRANS
RUNOUT
EXIT
TREND 1
SET
TREND 1
Display the submenu for the channel 1 trend monitoring options. The
options in this submenu are not yet available.
TREND 2
Display the submenu for the channel 2 trend monitoring options. The
options in this submenu are not yet available.
PROCESS
Display the submenu for the spectrum and orbit monitoring options.
TRANS
Display the submenu for the transient monitoring options (run-up and
coast-down monitoring).
RUNOUT
Display the submenu for the runout options. The options in this submenu
are not yet available.
EXIT
Return to the Factory menu. The monitor remembers the current values for
menu options, but does not write them to memory until you exit the
Factory menu.
TREND 2
PROCESS
TRANS
RUNOUT
EXIT
TREND 1
SET
LO RPM
TYPE
STEPS
EVENT
EXIT
HI RPM
SET
SPEED
ACTIVE
SUBTRACT
EXIT
MANUAL
SET
LEV INT
ORD CNT
ORD INT
ORB CNT
ORB INT
SPC CNT
SPC INT
EXIT
LEV CNT
SET
ORDERS
ORBITS
WINDOW
AVERAGE
EXIT
SPECTRA
SET
LINES
EXIT
HI FREQ
SET
REVS
EXIT
HI FREQ
SET
Options not
available at
this time
Described on
page 35
Described on
page 34
Described on
page 34
Described on
page 33
Described on
page 34
Options not
available at
this time
