ENHANCED VISION DaVinci, Руководство пользователя

Страница: 24 / 43

Adjusting the Volume of your Davinci in CCTV mode
On the Control Console you can turn the
[
Volume Wheel]
(Left EDGE of Console) to increase or decrease the volume.
A message on the top right corner of the screen will display the
volume level when adjusting the volume. The Davinci provides up to
10 volume levels.
VGA Toggle
At the back of the DaVinci is a VGA port
which allows for a computer signal to be
attached to the DaVinci display. This port
makes it possible to use the DaVinci display
as a computer monitor to save desk space.

To toggle from the camera image to the
computer image press the
“[Find]
and
[Pause/Play]” buttons on the
Control Console.

To toggle from the computer image back to the camera image,
press the [Find] button on the DaVinci Front Panel or
Control Console.
Auto-config while in PC Input Mode (Requires S/W R/N: 3.4.13_01 or
higher AND FP R/N: 01-12 or higher)
Pressing [Mode] while in PC Input Mode will automatically adjust
Brightness, Color and Position of the PC image
Turning the Camera Head Light On/Off in PC Input Mode
Press [Brightness Up/Down] to turn On/Off the Camera Head LED.

When using the DaVinci Display as a computer monitor, the controls for the
camera (e.g. Zoom, Mode, & Marker) will not work for the computer image.

Using the DaVinci LCD as a computer monitor is similar to attaching a typical
computer monitor to your computer, or connecting a secondary display to your laptop.
Refer to your computer or laptop user manual on how to connect a display. The
DaVinci LCD supports resolutions up to 1920 x 1080
Using DaVinci
24