Enfinity 1000TL, Руководство по установке

Страница: 7 / 40

7
• Important safety instructions
When using the product, please remember the information detailed below to avoid the risk of fire and
personal injury:
!
WarNINg!
Ensure input DC voltage
≤
Max.DC voltage. Over voltage may cause permanent
damage to inverter or other losses, which will not be covered by the warranty!
This chapter contains important safety and operating instructions. Read and keep
this operation guide for future reference.
!
WarNINg!
Authorized service personnel must disconnect both AC and DC power from the
Enfinity inverter before attempting any maintenance, cleaning or working on any
circuits connected to the Enfinity inverter.
• Before using the Enfinity inverter, read all instructions and cautionary markings on the Enfinity
inverter, and all appropriate sections of this guide.
• Use only attachments recommended or sold by Enfinity. Doing otherwise may result in a risk of fire,
electric shock, or injury to persons.
• To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that the
wires are not undersized. Do not operate the Enfinity inverter with damaged or substandard wiring.
• Do not disassemble the Enfinity inverter. It contains no user-serviceable parts. See Warranty for
instructions on obtaining service. Attempting to service the Enfinity inverter yourself may result in a
risk of electric shock or fire and will void your warranty.
• To reduce the risk of electric shock, authorized service personnel must disconnect both AC and DC
power from the Enfinity inverter before attempting any maintenance, cleaning or working on any
circuits connected to the Enfinity inverter. Turning off controls will not reduce this risk.
• Keep away from flammable, explosive materials to avoid fire disaster.
• The installation place should be away from humid or corrosive substance.
• To avoid electric shock accident, please do not disassemble the inverter because there are high-
voltage capacitors installed inside the inverter. Fatal high-voltage will remain in the inverter after its
disconnection with grid for 5 minutes.
• To reduce the chance of short-circuits, authorized service personnel must use insulated tools when
installing or working with this equipment.