Eurostar Installation and Operation Manual
33
6.1.9 Selecting the Pilot Cycle
Note: This icon will be visible on the Main Status Page only on thermostat mode.
To change the pilot cycle press the hourglass icon
, or, from the Main Status Page, choose
the letter icon
then select “SETUP” and “PILOT MODE”.
You can choose from one of the five different pilot cycles: "ALWAYS OFF", "30 MINUTES", “45
MINUTES”, “60 MINUTES” or "ALWAYS ON". The selected cycle will be displayed under the
hourglass icon on the main status page. Default setting is "ALWAYS OFF" since this is the most
fuel efficient configuration.
Note: Pilot feed rate is lower than the minimum combustion level feed rate.
6.1.9.1 Always
OFF
The pilot cycle begins when temperature set on the thermostat is reached. When the “ALWAYS
OFF” pilot cycle is selected, the stove will shut down when the temperature set on the thermostat is
reached. Every time the thermostat will call for heat, the stove will need to go through the complete
ignition cycle.
6.1.9.2 30 Minutes, 45 Minutes or 60 Minutes
The pilot cycle begins when temperature set on the thermostat is reached. It will last 30, 45 or 60
minutes depending of the selected pilot cycle. If the thermostat does not call for heat before the
end of the selected pilot cycle delay, the stove will shut down and will need to go through the
complete ignition cycle when the thermostat calls for heat again.
6.1.9.3 Always
ON
The pilot cycle begins when temperature set on the thermostat is reached. When the “ALWAYS
ON” pilot cycle is selected, the stove stay on pilot mode until the thermostat calls for heat.
ALWAYS ON
60 MINUTES
45 MINUTES
30 MINUTES
ALWAYS OFF
