EnerSys Alpha Micro 100, Инструкция по установке и эксплуатации

Страница: 42 / 88

41
017-220-J0 Rev C
Monitoring > Relay and Load Shed
Shows how the front panel dry contacts are configured. If any relays are used for load shedding, the time setting is
shown. The
Alpha Micro 100
has only two dry contacts available.
Figure 21 — Web GUI: Relay and Load Shed screen
Monitoring > User Input Status
User inputs are not available on
Alpha Micro 100
.
Monitoring > Power Outage
Shows the last five power outages (Input Voltage = 0Vac) experienced by the Alpha Micro 100. It does not take into
account duration unit ran on batteries if input voltage is not within the acceptable range. In the section USB Mainte-
nance - power outage users can set up time in minutes for which unit will ignore any small power outages. This will
avoid triggering nuisance alarms for any short duration power irregularities.
The unit also records time the duration of time that the unit ran on batteries to provide output power to the load, start
time of power outage, end time of power outage, and the duration of the outage.
Figure 22 — UPS Monitoring: Power Outages
C2 to C6 not available
on the Micro 100.