53
0120011-J0 Rev M
Controller Reset
Soft Reset
A soft reset enables the controller to finish saving files to flash memory before a power down or restart.
When pressed momentarily, the unit beeps twice then resets. The front-panel LEDs illuminate temporarily, but will
extinguish after the system has finished its 15-second self-test.
Soft/IP
reset
Hard reset
IP Address Reset
This reset allows local access; for example, with a laptop and a standard network cable. To reset the IP address,
press and hold the Soft/IP reset button for three seconds.
The CXCI+ beeps three times, the IP is reset to
10�10�10�201
and the DHCP is disabled. The settings are saved and
the unit is reset.
Hard Reset
A hard reset button is also located on the front panel on the CXCI+, it is the unmarked button on the left front.
This reset button can be used to restart the microprocessor if the soft reset button fails.
CAUTION!
During reset, the controller may need to run a defragmentation cycle. Cycling of the
LEDs on the controller front panel indicate that defragmentation is in progress. A full
defragmentation can take up to 20 minutes to perform. DO NOT POWER DOWN the con-
troller during this time.
CAUTION!
Use of hard reset may cause loss of data.
Содержание alpha LPS36
Страница 1: ...LPS36 Line Power System Technical Guide 0120011 J0 Effective 07 2020...
Страница 2: ......
Страница 4: ......
Страница 85: ......