EnerSys alpha LPS36, Техническое руководство

Страница: 10 / 86

0120011-J0 Rev M 8
LPR48-150
LPS36
Channel 1
T1
R1
≤ 75W
≤ 75W LPS36
Channel 2
CONVERTER #1
CONVERTER #2
RADIO
100W
Load
T2
R2
+190V
-190V
+190V
-190V
Input A
Input B
LPR48-150
LPS36
Channel 1
T1
R1
≤ 75W
≤ 75W LPS36
Channel 2
CONVERTER #1
CONVERTER #2
RADIO
100W
Load
T2
R2
+190V
-190V
+190V
-190V
Input A
Input B
Bridging circuits
1�4 Electrical Safety
Before working with any live battery or power system, follow these precautions:
a. Remove all metallic jewelry, such as watches, rings, metal rimmed glasses, or necklaces.
b. Wear safety glasses with side shields at all times during the installation.
c. Use OSHA approved insulated hand tools. Do not rest tools on top of batteries.
WARNING!
The DC input to the modules (and the converter system) – though not dangerous in volt-
age – has a high short circuit current capacity that may cause severe burns and electri-
cal arcing.
The DC output is a potentially dangerous voltage. Do not touch the output connections
when under power. Ensure that power has been removed from the outputs before work-
ing on them.
NOTE:
RFT-V output circuit configuration – bridged operation (not permitted)
The DC output is classified as an RFT-V circuit with a maximum rated power of
100W per channel. Paralleling of RFT-V circuits over multiple telecommunications
wires for the purpose of delivering power in excess of 100VA to a single load circuit
is not permitted. Refer to UL/CSA 60950-1 Section 6.2.1 for details.
RFT-V output circuit configuration – normal operation (permitted)