EnerSys alpha LPS36, Техническое руководство

Страница: 46 / 86

0120011-J0 Rev M 44
CXCI+
Converter
6�8 System Startup with CXCI+ Controller
To ensure proper operation, perform the following startup and test procedure after completing the system installation
wiring.
6�8�1 Procedure
Start with DC input breakers off.
Install the CXCI+ into the leftmost position. (19"/23" shelf options only).
6" may be connected to a controller in a rectifier shelf via CAN (see section 6.6.8 on page
41).
Install the converters in the slots.
Turn on the DC breakers.
6�8�2 Parameter Setup
Reset CXCI+ controller (front reset button) to set network IP parameters to factory default:
•
IP address: 10.10.10.201
• Subnet mask: 255.255.255.0
Connect a laptop to the controller with a network cable.
Laptop IP Network settings ( Start > Control Panel )
• IP address: 10.10.10.202
• Subnet mask: 255.255.255.0
Turn off Pop-up Blocker.
Enter: 10.10.10.201 in the web address bar. (Alpha recommends Internet Explorer with com-
patibility view turned on)
Login to the controller:
•
User name: Enter your company name and your initials
• Password: 1234
Language selection: English
Go to Controller > Date & Time to set correct date and time.
Select Line Powering System > View Live Status to display a graphical view of all
acquired LPS devices. Clicking an LPS module displays a pop-up window with information
specific to that LPS module and its channels.
NOTE: If red text displays saying, “ Invalid Shelf IDs have been detected! ” or “ Duplicate
Shelf IDs have been detected! ” the rotary dials to set shelf IDs have not be set up cor-
rectly.
Log out.