EnerSys alpha LPS36, Техническое руководство

Страница: 59 / 86

57 0120011-J0 Rev M
6�9�6 Configure Line Power Channels
Each LP module has four channels that can be given a name, description and assigned to a load. All channels
are listed in table that can be sorted and searched. You can also export all channel details to a file.
To configure the channels:
1. Go to
Power System > Line Power System > Inventory > Line Power Channels
. You will see a table of
channels in the system. There is also a
Export Channel Details
button to export the information to a .csv
file.
2. Channels cannot be added or removed. It is also possible to configure channels and get detailed channel
information from Power System > Line Power System > Inventory > Line Power Modules and clicking
the more details icon for the module.
3. Click the more details icon for the channel you want to configure.
4. In the channel table, assign an optional name and description. This might be a channel address, wire color or
customer name.
5. In the channel table, assign an optional
Line Power Load
. To assign a load it is necessary to first create a
load. Refer to section 6.9.7 to do this.
6�9�7 Configure the Line Power Loads
A line power load represents the remote load that is powered by the LP module channels. Create a load when
you want to monitor and alarm separate remote loads. Creating a load allows all channels that have been as-
signed to the load to be powered on or off as a group. To turn all the channels assigned to a load on or off, use
the Power On or Power Off buttons on the Configuration table.
You may add or remove loads as needed. Removing a load does not affect the power delivered.
Note : To assign channels to a load, refer to the section on LPS Layout or Configure Line Power Channels .
To configure the loads:
1. Go to Power Systems > Line Power System > Inventory > Line Power Loads . You will see a table for
loads in the system. This table shows how many channels are assigned to the load and the loads total output
current and power. Add or remove loads from this screen.
2. Click the more details icon for the load you want to configure.
3. In the
Configuration table, assign the load a name and a description. Alpha recommends that you assign
the load a name that represents the actual load.
4. Configure the load alarms as needed.
6�9�8 Line Power System Layout
The line power system Layout screen shows a graphical view based on the shelf and slot ID as reported by the
line power modules. This view allows a convenient way to view module status and to configure and interact with
individual channels.
Using the Layout Screen to View Module Status
The line power Layout screen provides a convenient way to find the following status information:
•
Module shelf and slot position
• Output voltage, power and current for each module
• Module and channel alert status
• Module and channel information (detailed)
The following steps describe how to use the Layout screen to view module and channel status:
1. Go to Power Systems > Line Power System > Layout . This screen shows a grid of LP modules organized
by shelf ID vertically, and slot ID horizontally. Each module is represented by a rectangle showing the output
voltage and the output power for each channel. The information in the rectangle is green to indicate that a
module is operating normally.