background image

ENERGIC Plus

AR-TOP [V.140 – January 2011]

USER'S MANUAL

 

 

___________________________________________________________________________________________________________________________________________________ 

  BURN AND BODILY INJURY PREVENTION

The battery produces very high currents when short circuited, and will burn the skin severely if in contact with  
any metal conductor that is carrying this current.
Do not permit rings on fingers to come in contact with battery terminals or the cell connectors on top of the 
battery.
Battery acid is very corrosive. Alwais wear correct eye and body protection when near batteries.

  FIRE AND EXPLOSION PREVENTION

When batteries are being recharged, they generate hydrogen gas that is explosive in certain concentrations in air  
(the flammability or explosive limits are 4.1% to 72% hydrogen in air). The spark-retarding vents help slow the 
rate of release of hydrogen, but the escaping hydrogen may form an explosive atmosphere around the battery if 
ventilation is poor.
The  ventilation system should be designed to provide an adequate  amount  of  fresh air  for the number  of 
batteries being charged. This is essential to prevent an explosion. 
Always keep sparks, flames, burning cigarettes, and other sources of ignition away from the battery recharging  
area. Do not break "live" circuits at the terminals of batteries. Do not lay tools or anything that is metallic on  
top of any battery.

To prevent arcing and burning of the connector contacts, be sure the charger is OFF before connecting or  
disconnecting the battery. The digital display must be completely OFF.

  MEDICAL AND FIRST AID TREATMENT

First aid facilities and a qualified first aid person should be available for each shift for immediate treatment of  
electrical shock victims.
EMERGENCY   FIRST   AID:   Call   phisician   and   ambulance   immediately   and   use   First   Aid   techniques 
recommended by the American Red Cross.

DANGER: ELECTRICAL SHOCK CAN BE FATAL.

If person is unconscious and electric shock is suspected, do not touch person if he or she is in contact with  
charging equipment, battery, charging leads, or other live electrical parts. Disconnect power at wall switch and 
then use First Aid.
Dry wood, wooden broom, and other insulating material can be used to move cables, if necessary, away from  
person.
IF BREATHING IS DIFFICULT, give oxygen.
IF NOT BREATHING, BEGIN ARTIFICIAL BREATHING, such as mouth-to-mouth.
IF PULSE IS ABSENT, BEGIN ARTIFICIAL CIRCULATION, such as external heart massage.

In   case   of   acid   in   the   eyes,   flush   very  well   with   clean   water   and   obtain   professional   medical   attention  
immediately.

  EQUIPMENT WARNING LABELS

Inspect all precautionary labels on the equipment.
Order and replace all labels that cannot be easily read.

__________________________________________________________________________________________________________________________________________________

Page 3/32

Содержание AR-TOP

































Отзывы: