ENERGIC Plus
AR-TOP [V.140 – January 2011]
USER'S MANUAL
___________________________________________________________________________________________________________________________________________________
EQUALIZE CYCLE – MANUAL
During the charging of the battery the operator can scroll the menu of the display, and he can force a
EQ manual cycle at the end of this cycle.
DESULFATION
The operator can every time interrupt the standard charging and enable with a easy procedure a special
desulfation cycle. During the charging the operator can press Enter few seconds and the display shows a
desulfation menu, in this menu the operator can select the time during of desulfation and the type of restart of
desulfation, infact sometimes it is strategic important to complete a standard charging after a completed
desulfation cycle. With AR TOP special desulfation function this is very easy.
REFRESH-MAINTENANCE
This function is useful to keep the battery in perfect condition when it's not used for an long period (weeks,
months, ...).
It is sufficient to leave the battery connected to the charger. After a normal termination of the charge and the
equalize cycle, the control board will activate the charger automatically for 15 minutes of refresh charge every
day.
While the charger waits before to activate a Refresh cycle, the display shows the messages:
•
Battery Voltage
[Volt]
•
Nr of Refresh cycles already given to the battery
•
Total Time of Charge
[hours.minutes]
•
Total Capacity Returned
[Ah]
During cycle Refresh, the display shows the same set of information that are visualized during the normal
charge cycle.
__________________________________________________________________________________________________________________________________________________
Page 22/32
xx.x V R.END NR
xxx Ah x.x t
DELAYED EQUALIZE
DAY TIME
FORCE MANAUL EQ
ENABLED
