Endress+Hauser RID14, Руководство по эксплуатации

Страница: 43 / 56

RID14 Appendix
Hauser 43
14 Appendix
14.1 DTM operating parameters
14.1.1 Operation menu
Display duration
Navigation

Operation → Alternating time
Description Use this function to set the length of time the measured values are
displayed if the values alternate on the display. The display only alternates
automatically between values if more than one measured value is defined.
User entry Time in seconds [2-20]
Factory setting 5
Additional information • The Value 1 display - Value 8 display parameters are used to specify
which measured values are shown on the local display.
• The display format of the displayed measured values is specified using
the Format display parameter.
• Visible offline: Yes
• Writable offline: Yes
"Display value X" submenu
Navigation

Operation → Display value X
Description Settings to display the measured values received via PROFIBUS.
Source address
Navigation

Operation → "Display value X" submenu → Source address
Description Allows users to select the bus address of the device whose values are to be
displayed.
User entry Bus address [0-125]
Factory setting 0
Additional information • Visible offline: Yes
• Writable offline: Yes
Offset source
Navigation

Operation → "Display value X" submenu → Offset source
Description Indicates the index (offset) of the first byte of the value to be displayed
from the payload data received.
User entry Offset [0-244]
Factory setting 0
Additional information • Visible offline: Yes
• Writable offline: Yes
Description