Endress+Hauser RID14, Руководство по эксплуатации

Страница: 8 / 56

Identification RID14
8 Hauser
3 Identification
3.1 Device designation
3.1.1 Nameplate
The right device?
Compare the order code on the nameplate of the device to that on the delivery papers.
Made in Germany 2013
D-87484 Nesselwang
Order code: RID14-xxxxxxx
Ser. no.: xxxxxxxxxxx
Ext. ord. cd.: xxxxxxxxxxxxxxxxxx
9 - 32 V
Ta = -40 ...+80°C
FW: XX.XX.XX DevRev: X
4
IP67 NEMA4X
Type 4X
RID14
1
2
3
4
5
6
A0021495
 1 Nameplate of the field indicator (example)
1 Designation, order code and serial number of the device
2 Power supply
3 Ambient temperature range
4 Firmware version and device revision
5 Degree of protection and type of approval
6 Approvals
3.2 Scope of delivery
The scope of delivery of the field indicator comprises:
• Field indicator
• Brief Operating Instructions as hard copy
• ATEX - safety instructions for using a device approved for hazardous areas, optional
• Optional accessories (e.g. pipe mounting bracket), see 'Accessories' section.
3.3 Certificates and approvals
CE mark, Declaration of Conformity
The device is designed in accordance with good engineering practice to meet state-of-
theart safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate.
The device complies with the standards EN 61 010-1 "Protection Measures for Electrical
Equipment for Measurement, Control, Regulation and Laboratory Procedures" and with the
EMC requirements of IEC/EN 61326.
The device described in these Operating Instructions therefore complies with the statutory
requirements of the EU Directives. The manufacturer confirms that the device has been
successfully tested by applying the CE mark.