Diagnostic information and remedial measures
Proline t-mass T 150
44
Hauser
E
+
–
ON
OFF
1
2
1
2
A0017255
1. Unscrew the electronics compartment cover.
2. Pull out the display module with a gentle rotational movement. To make it easier to
access the lock switch, attach the display module to the edge of the electronics
compartment.
Display module is attached to the edge of the electronics compartment.
3. Setting the write protection switch (WP) on the main electronics module to the ON
position enables the hardware write protection.
In the
Locking status
parameter the
Hardware locked
option is displayed. In
addition, on the local display the -symbol appears in front of the parameters in
the header of the operational display and in the navigation view.
4. Feed the cable into the gap between the housing and electronics module and plug the
display module into the electronics compartment in the desired direction until it
engages.
5. Screw down the electronics compartment cover.
11
Diagnostic information and remedial measures
Faults detected by the self-monitoring system of the measuring device are displayed as a
diagnostic message in alternation with the operational display. The message on the remedial
measures can be called up from the diagnostic message, and contains important information
on the fault.
