Proline Prowirl R 200
Installation
Hauser
23
6.2.7
Turning the display module
+
E
–
1
3 mm
A0013905
6.3
Post-installation check
Is the device undamaged (visual inspection)?
Does the measuring device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the section on "Pressure-temperature ratings" in the "Technical
Information" document on the CD-ROM provided)
• Ambient temperature (→ 15)
• Measuring range
Has the correct orientation for the sensor been selected (→ 12)?
• According to sensor type
• According to medium temperature
• According to medium properties (outgassing, with entrained solids)
Does the arrow on the sensor nameplate match the direction of flow of the fluid through the
piping (→ 12)?
Are the measuring point identification and labeling correct (visual inspection)?
Is the device adequately protected from precipitation and direct sunlight?
Are the securing screw and securing clamp tightened securely?
