Endress+Hauser Proline Promag W 400 Скачать руководство пользователя страница 3

Страница: 3 / 64

Proline Promag W 400

Document information

Hauser

Document information

1.1

Symbols used

1.1.1

Safety symbols

Symbol

Meaning

DANGER

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.

WARNING

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.

CAUTION

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.

NOTICE

NOTE!

This symbol contains information on procedures and other facts which do not result in personal
injury.

1.1.2

Electrical symbols

Symbol

Meaning

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

Alternating current

A terminal to which alternating voltage is applied or through which alternating current flows.

Direct current and alternating current

• A terminal to which alternating voltage or DC voltage is applied.
• A terminal through which alternating current or direct current flows.

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential
equalization line or a star grounding system depending on national or company codes of practice.

Содержание Proline Promag W 400

































































Результаты поиска

Содержание Proline Promag W 400

Отзывы:

Похожие инструкции для Proline Promag W 400

Бренды по названию

Популярные бренды

Endress+Hauser Proline Promag W 400, Краткое руководство по эксплуатации

Результаты поиска

Содержание Proline Promag W 400

Отзывы:

Похожие инструкции для Proline Promag W 400

Бренды по названию

Популярные бренды