Endress+Hauser Proline Promag W 400 Скачать руководство пользователя страница 11

Страница: 11 / 64

Proline Promag W 400

Storage and transport

Hauser

Technical documentation can also be downloaded from the Download Area of the

Hauser web site:

www.endress.com

→ Download. However this technical

documentation applies to a particular instrument family and is not assigned to a specific

device.

W@M Device Viewer

1. Launch the W@M Device Viewer:

www.endress.com/deviceviewer

2. Enter the serial number (Ser. no.) of the device: see nameplate (→  2,  10).

 All the associated documentation is displayed.

Hauser Operations App

The

Hauser Operations App

is available for Android (Google play) and iOS (App

Store).

Via the serial number:

1. Launch the

Hauser Operations App

2. Enter the serial number (Ser. no.) of the device: see nameplate (→  2,  10).

 All the associated documentation is displayed.

Via the 2-D matrix code (QR code):

1. Launch the

Hauser Operations App

2. Scan the 2-D matrix code (QR code) on the nameplate (→  2,  10).

 All the associated documentation is displayed.

Storage and transport

5.1

Storage conditions

Observe the following notes for storage:

• Store in original packaging.

• Do not remove protective covers or protective caps installed on process connections.

• Protect from direct sunlight.

• Select a storage location where moisture cannot collect in the measuring device.

• Store in a dry and dust-free place.

• Do not store outdoors.

• Storage temperature(→  13)

Содержание Proline Promag W 400

































































Результаты поиска

Содержание Proline Promag W 400

Отзывы:

Похожие инструкции для Proline Promag W 400

Бренды по названию

Популярные бренды

Endress+Hauser Proline Promag W 400, Краткое руководство по эксплуатации

Результаты поиска

Содержание Proline Promag W 400

Отзывы:

Похожие инструкции для Proline Promag W 400

Бренды по названию

Популярные бренды