Endress+Hauser OUSAF44, Руководство по эксплуатации

Страница: 15 / 40

OUSAF44 Electrical connection
Hauser 15
6.1 Connecting the sensor
The sensor is connected to the transmitter via the pre-terminated or labeled cable set CUK80
(for connection to CM44P) or OUK40 (for connection to CVM40) . The terminals and labeling
may vary depending on the transmitter in use. The cable set must be ordered separately.
‣
Do not shorten or otherwise modify the CUK80 cable!
RD
BK
GY
A B
YE
YE
BK
BK
GY
WH
GN
B
A0028385
 6 OUSAF44 connecting cable
A Light source (lamp) power supply
B Signals of measurement and reference detector
CM44P terminal Cable color Assignment
P+ YE (thick) Lamp v
S+ YE (thin) Detection of lamp v
S- BK (thin) Detection of lamp voltage -
P- BK (thick) Lamp voltage -
A (1) RD sensor measuring de
C(1) BK sensor measuring detector -
SH (1) GY Shield
A (2) WH Sensor ref
C(2) GN Channel 1 Sensor reference -
SH (2) GY Channel 1 Shield
6.2 Lamp voltage
Sensor version Lamp type Lamp voltage [V]
OUSAF44-xxxx Low-pressure mercury lamp 10.0 ± 0.1
1)
11.9 ± 0.1
2)
1) When connected to CM44P.
2) When connected to CVM40.