Endress+Hauser OUSAF44, Руководство по эксплуатации

Страница: 6 / 40

Basic safety instructions OUSAF44
6 Hauser
2. Ensure that electrical cables and hose connections are undamaged.
3. Do not operate damaged products, and protect them against unintentional operation.
4. Label damaged products as defective.
During operation:
‣
If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
2.5 Product safety
L
CAUTION
Mercury lamp
Can cause damage to the eyes and skin!
‣
Avoid any exposure of the eyes and skin to the unshielded product.
‣
Wear suitable protective goggles to protect against UV radiation.
2.5.1 State-of-the-art technology
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
international standards have been observed.
2.5.2 Versions with hazardous area lamp
‣
Observe the safety instructions in the XA pertaining to this manual.
Safety instructions for electrical equipment in hazardous areas, photometer sensors,
XA01403C