Endress+Hauser Liquistation CSF33, Руководство по эксплуатации, Страница: 22 / 44

Diagnostics menu Liquistation CSF33
22
Hauser
Current pump run time Read only
Power supply Read only The current supply voltage is displayed.
24 V ±0.5 V
Current Read only The current consumption of the pump is displayed.
Vacuum Read only The vacuum is an indicator of the suction height.
-> 100 mbar is equivalent to a suction height of approx.
1 m.
Probe detected Read only Yes: the medium was detected
No: no medium was detected
Vacuum pump
(only for version with vacuum
pump)
Action
Bottle configuration Read only
Bottle volume Read only
Distributor position Options
• Front
• Bottle 1
...
• Back
Select which bottle should be filled with the sample.
Sample volume Factory setting
200 ml
The sample volume is preset at the factory.
Start sampling Action Perform sampling manually.
Action message Read only The progress of the sampling operation is displayed.
Power supply Read only The current supply voltage is displayed.
24 V ±0.5 V
Current Read only The current consumption of the pump is displayed.
Medium LF1 Read only • Medium detection conductivity 1 switchoff
• Medium detection conductivity 2 disconnection from
protective circuit
-> Both "No" at the start
-> If "Yes", clean conductivity 2
Medium LF2 Read only
Distribution arm Action Only for bottle configurations with more than one bottle.
Test distribution arm Read only When the menu item is activated, the distribution arm
undergoes a test run. Afterwards, the system moves to
each position in succession and the position is displayed.
In the case of plate distribution, the arm moves left and
right to ensure the bottles are numbered consecutively.
Calibrate the distribution arm if the arm is not
positioned precisely over the bottles.
Position Read only
Diagnostics/Systemtest/Reset
Function Options Info