Endress+Hauser Levelflex M FMP43, Руководство по эксплуатации

Страница: 71 / 108

Levelflex M FMP43 with PROFIBUS PA Commissioning
Hauser 71
Exiting the navigation
• Press
F
again to run through the different modes of the envelope curve navigation.
• Press
O
and
S
to exit the navigation. The set increases and shifts are retained. Only when you
reactivate the " recording curve " (0E2) function does the Levelflex use the standard display
again.
6.8 Basic setup with the ToF Tool
To carry out the basic setup with the ToF Tool operating program, proceed as follows:
• Start the ToF Tool operating program on the PC and establish a connection
• Select the "
basic setup " function group in the navigation bar
The following appears on the screen:
Basic setup step 1/6:
• Status image
• The TAG number can be entered.
L00-FMP4xxxx-20-00-00-en-001
!
Note!
• Each parameter that is changed must be confirmed with the
RETURN key!
• The " Next " button takes you to the next screen:
⇒
⇓
After 3 s, the following message appears
E HAUSER
E + –