5 Getting Started
Fieldgate FXA720
24
Hauser
5. Enter the current
Fieldgate IP
address and select the
Bus connector
(the channel to be used
with the node specified in Step 4).
6. Click "
Finish
" to accept the default timeout settings and end the configuration.
Caution:
Timeout settings should be changed by PROFIBUS specialists only
7. If the Fieldgate is found in the network and is working properly, then the Node line will be
marked with a green check mark. In addition, Fieldgate information is displayed.
– The node configuration can be modified from this screen by clicking the
"Edit"
button. To save the configuration please click
"Apply".
8. For single channel Fieldgates, press
"OK"
to store the configuration and close the
configuration window, otherwise continue with Step 9.
Содержание Fieldgate FXA720
