Endress+Hauser ASP Station 2000 RPS20B, Руководство по эксплуатации

Страница: 35 / 60

ASP Station 2000 RPS20B Operation
Hauser 35
1 A main program is active.
Four main programs are available. A main program is selected in the NAME
menu item.
2 A main program and a switching program are active.
Two program pairs (1<->1 or 2<->2) are available. The switching programs (U1
and/or U2) are permanently assigned to the main programs (1 and/or 2).
1+event A main program and the event program are active.
The event program is enabled by a digital input. One of the digital inputs must
be assigned for this function and configured with the EVENT function. A
separate sampling program and separate bottles can be defined for the event
program.
2+event A main program, a switching program and the event program are active.
The changeover from the main program to the switching program can be triggered as follows:
Day Change to the switching program at two configurable times in one day
Week Change to the switching program on three configurable days in a week
Q greater Change to the switching program when the value exceeds a configurable
threshold

An analog signal must be connected to the analog input of the sampler for
this function.
Q smaller Change to the switching program when the value drops below a configurable
threshold
Ext. signal Change to the switching program by means of an external digital signal

One of the digital inputs must be assigned for this function and
configured with the SWITCH function.
Separate sampling programs and bottles can be defined for the switching programs.
9.2.4 Creating a main program
Menu structure →  34