Maintenance and care
multi EA 5000
168
14.14.6 Cleaning the condensation coil
CAUTION
Risk of burns at the hot furnace
¡
Switch off the device and allow it to cool before performing maintenance.
ð
Clean the condensation coil annually.
}
Switch off the basic modules via the power switch and allow the device to cool.
}
Switch off the gas supply and disconnect the power plug from the power outlet.
}
Open the doors of the basic module.
}
Release the fork clamp connecting the outlet of the TOC combustion tube with the
condensation coil.
}
Remove the fork clamp and disconnect the spherical joint connector
}
Remove the FAST connector on the bottom end of the condensation coil.
}
Carefully remove the condensation coil from the clamps on the combustion furnace.
}
Inspect the condensation coil for deposits and cracks.
}
Rinse the condensation coil with ultrapure water and dry it well.
}
Reinstall the condensation coil in reverse order.
}
Check the system for leaks.
ü
The analysis system is ready for operation again.
1
2
3
Figure 80Components in the basic module
1 TOC combustion tube injection port
2 Spherical joint (fasten with forked
clamp)
3 Condensation coil
