emz smart Sol plus, Руководство по сборке и эксплуатации

Страница: 59 / 114

59
Commissioning mode
›0.5 Outputs‹ appears.
Select and activate the output in-
terfaces RO1 - RO4 / REL used and
assign them to the selected function
by scrolling.
Once all outputs have been assigned
correctly, acknowledge by pressing
›Next‹.
›0.4 Volumetric flow‹ appears.
If TS6 / TS7 / TS8 has already been
assigned to ›Impeller‹, ›Impeller‹ will
appear here in terms of sensor sys-
tem. The number of pulses per litre
still has to be selected.
If different features (or no features)
are assigned to TS6 / TS7 / TS8, a
vortex sensor or a flow rate detector
can be selected via pump
activation. To this effect, the vortex
volumetric flow sensor installed or the
max. pump flow rate still have to be
defined.
Acknowledge by pressing ›Next‹..
Important!
A high-efficiency pump can be connected to TS7 to TS10.
The WILO ST 25/7 PWM is preassigned.
Vortex UI12
Flow rate
connected to
Grundfos 1-12l/min
RO2
Next
0.4 Volumetric flow
25.08.2012 09:13
RO1
HE-control signal
RO2
RO3
RO4
REL
Solar pump 1
---
---
---
---
---
Next
0.5 Outputs
25.08.2012 09:13