Emotiva BASX MC1, Руководство пользователя

Страница: 20 / 48

Page 14
BasX MC1 Cinema Processor
Note: Most computers and streaming devices will automatically detect the USB audio
capabilities of the MC1 and set themselves appropriately. This will enable you to seamlessly
play files and other audio sources at sample rates above those directly supported by the
USB Audio Input on the MC1. If you receive an error message when attempting to play high-
resolution files on the MC1 via USB you may need to adjust the audio output settings on your
source device.
Note: In order to ensure that the USB Audio Input on the MC1 initializes properly, and is
recognized by your computer, make sure that your computer is connected and powered On
before turning on your MC1.
10. RS-232 Serial Remote Control Input
This input accepts control signals from an RS-232 Serial remote control device.
11. Main 13.2 Channel Unbalanced Analog Audio Outputs
This is the main 13.2 channel audio output on the MC1. The main, surround, and height channels
should be connected to the inputs on the appropriate power amplifiers driving your speakers
using high quality unbalanced audio interconnect cables. The subwoofer outputs should be
connected to the LFE or line level input on your subwoofer(s).
Note: If your power amplifier only offers balanced inputs, then you may connect the outputs
of the MC1 to those inputs using passive unbalanced-to-balanced adapters or adapter cables,
with no loss of audio quality.
Note: The SW1 and SW2 Unbalanced Subwoofer Outputs carry the same signals as the SW1 Bal
and SW2 Bal Subwoofer Outputs. Both sets of subwoofer outputs are active at the same time.
Note: If you select One Sub in the Setup Menu then only the SW1 and Bal SW1 Outputs will be
active.
12. Main HDMI Outputs
These are the main HDMI Outputs on the MC1 and should be connected to your TV and/or
projector. Both HDMI outputs carry the same video signal, and the On-Screen Display Menu
will be visible on both, but HDMI #1 is considered to be the primary output, and only HDMI #1
supports ARC and eARC.
Note: ONLY HDMI OUTPUT #1 SUPPORTS ARC AND ENHANCED ARC (eARC). Therefore, if you
plan to use ARC or eARC with a certain TV, then that TV MUST be connected to HDMI Output #1.
Note: ARC / eARC is a separate AUDIO input on the MC1. If you wish to listen to audio from an
App on your TV via ARC or eARC then you MUST select the ARC / eARC Input on the MC1.
(The MC1 will NOT switch to playing the ARC or eARC signal automatically when it is present.)
NOTE: The MC1 has a special feature that enables you to select which HDMI Outputs are active.
This feature is provided to prevent compatibility issues that sometimes arise with certain TV
sets and projectors. Refer to the Special Features section for more details.