Emotiva BASX MC1, Руководство пользователя

Страница: 18 / 48

Page 12
BasX MC1 Cinema Processor
BasX MC1 Rear Panel
1. Subwoofer Outputs
The MC1 has two Balanced Subwoofer Outputs and two Unbalanced Subwoofer Outputs.
All four subwoofer outputs deliver the same audio information.
However there are independent Level Trim and Distance settings for SW1 and SW2.
Note: For either SW1 or SW2 both the Balanced and Unbalanced Subwoofer Outputs are active
at the same time.
Note: If you configure the MC1 to have Two Subwoofers then both the SW1 and SW2 Outputs
will be active. If you configure the MC1 to have One Subwoofer then ONLY the SW1 Outputs will
be active.
2. Stereo Analog Inputs
Use these inputs to connect your analog stereo sources. They might be used to connect the
output of a phono preamp or tuner, or you could connect the analog output of a phone or music
player to one of these inputs with the appropriate adapter cable.
3. Digital Audio Inputs
Use these inputs to connect a digital audio source. The MC1 includes two electrical S/PDIF (Coax)
inputs and two optical S/PDIF (Toslink) inputs. These inputs accept stereo audio at sample rates
up to 24/192k and low bandwidth digital surround sound formats like Dolby Digital and DTS
Digital Surround.
4. Bluetooth Antenna
This is the antenna for the internal Bluetooth receiver in the MC1, which supports the latest
Bluetooth and AptX audio standards.
4 6 5 7 8 10
12
9 1 2 3
13 14
SW1 BAL SW2 BAL BT ANTENNA EMO-Q MIC IR
IN
TRIG
OUT
SW1 SW2 RRH RMH RFH RBS RS RF C LF LS LBS LFH LMH LRH
(RW) (LW)
13.2 ANALOG
OUTPUTS
ANALOG
INPUTS
AN1 AN2 AN3 AN4
R
L
DIGITAL INPUTS HDMI OUTPUTS HDMI INPUTS
2 1 (eARC) 1 2 3 4 5 6
AC INPUT
POWER
UPDATE USB RS232
CO1
OPT1
CO2
OPT2
11
15