EMobility eClick, Руководство по установке

Страница: 47 / 540

47
Installation
RCD
Charging power 3,7 kW; 11 kW 7,4 kW; 22 kW
Charging current 16 A 32 A
Example F204A, 4-pole, 25/0.03 A ABB F204A, 4-pole, 40/0.03 A ABB
Standards DIN EN 61008-1 / DIN EN 61008-2-1 DIN EN 61008-1 / DIN EN 61008-2-1
Type A A
Operating voltage 230/400 V AC 230/400 V AC
Poles 4-pole 4-pole
Rated residual current 30 mA 30 mA
Rated current 25 A 40 A
Tripping time 300 ms 300 ms
Operating characteristic instantaneous short-time delayed (AP-R)
Overvoltage category III III
Fouling factor 2 2
Ambient temperature
Tmax +55 °C,
Tmin -25 °C
Tmax +55 °C,
Tmin -25 °C
Material number 10284822 10118695
Circuit breaker
Charging power 3,7 kW; 11 kW 7,4 kW; 22 kW
Charging current 16 A 32 A
Example S203-NA K, 20A ABB S203-NA K, 40A ABB
Standards DIN EN 60947-1, -2 / DIN EN 60898-1 DIN EN 60947-1, -2 / DIN EN 60898-1
Tripping characteristics K K
Poles 4-pole 4-pole
Rated switching capacity 6,000 A 6,000 A
Rated current 20 A 40 A
Insulation voltage 4 kV 4 kV
Overvoltage category III III
Fouling factor 2 2
Ambient temperature
Tmax +55 °C,
Tmin -25 °C
Tmax +55 °C,
Tmin -25 °C
Material number 10133671 10118694
• Installation of overvoltage protection equipment,
if demanded under national standards
• Routing of the connecting line to the installation site
• Connection of the supply line between the eClick / eBox
and the sub-distribution
Caution
For space reasons, the supply
line chosen must have whenever
possible a conductor area no
greater than 6 mm².
From a thermal point of view, a
10 mm² supply cable must be
selected. In addition, the cable
cross-section of the feed line is
selected according to its length.