80
When the count value reaches to SET1, Output-1 becomes active. If
Output-1 pulse time is not 0, Output-1 changes position at the
end of the pulse time. If Output-1 Pulse Time is , it
changes position until Manual Reset input is active or according to
Output-2 position.
When the count value reaches to value, Output-2 becomes
active. Counting is stopped. If Output-2 pulse time is not 0,
count value becomes equal to SET2 value, counting is started again
and Output-2 becomes inactive. In this case, if Output-1 is active, it
becomes inactive with Output-2.
Count value is added to total count value when automatic reset is active
in COUNTER /
“
TOTALIZER COUNTER” functions.
How it operates in COUNTER / “TOTALIZER COUNTER”, TIMER
and CHRONOMETER functions are explained below:
Counting direction : P
Þ
0 (Downcount)
=
Set1
0
Set2
Reset
=
=
=
Set1
0
Set2
Reset
=
=
=
i
Output-1
Output-1
Output-2
Output-1
Output-1
Output-2
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero. If
not, Automatic Reset is not realised.
