background image

1

www.enviromaster.com

The Ductless Split System of Choice

!

RECOGNIZE THIS SYMBOL AS AN INDICATION

OF IMPORTANT SAFETY INFORMATION.

!

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL

EMI DUCTLESS SPLIT SYSTEM

AIR HANDLERS

FCP/FHP, WCP/WHP, CNR, and CCP/CHP

P/N# 240-4373, Rev. 1.2 [04/04]

FLOOR MODEL AIR

HANDLER (FCP/FHP)

CORNER MOUNTED AIR

HANDLER (CNR)

WALL MOUNTED AIR

HANDLER (WCP/WHP)

CEILING MOUNTED AIR

HANDLER (CCP/CHP)

This manual is intended as an aid to qualified service

personnel for proper installation, operation, and maintenance
of the EMI ductless split system floor, wall, corner, or ceil-
ing mounted air handler.  Read these instructions thoroughly
and carefully before attempting installation or operation.
Failure to follow these instructions may result in improper
installation, operation, service or maintenance, possibly
resulting in fire, electrical shock, property damage, personal
injury, or death.

TO THE INSTALLER

(1) Retain this manual and warranty for future reference.

(2) Before leaving the premises, review this manual to

be sure the unit has been installed correctly and run
the unit for one complete cycle to make sure it func-
tions properly.

To obtain technical service or warranty assis-

tance during or after the installation of this unit, call
toll free:

 1 – 800 – 228 – 9364

When calling for assistance, please have the
following information ready:

• Model number _____________________
• Serial number  _____________________
• Date of installation  _________________

Common To All Air Handlers

Safety Instructions .................................................  2
Installer Responsibilities ......................................... 2
The EMI Air Handler Family ..................................... 2
Installer Supplied Items ........................................... 3
Materials of Construction ........................................ 3
Inspection ............................................................... 3
Items for Consideration ............................................ 3
Controls and Components ....................................... 3
Unit Mount Infrared Control Operation ...................... 3
Optional Controls/Components................................ 3
Electrical Wiring ...................................................... 4

Final Installation Checks and Start-up .................. 4-5
Cooling Only Operation and Heat Operation ......... 6-7
Remote Thermostat Operation ............................. 8-9
Floor Model Air Handler (FCP/FHP) .................. 10-14
Ceiling Mounted Air Handler (CCP/CHP) .......... 15-16
Corner Mounted Air Handler (CNR) ................... 17-19
Wall Mounted Air Handler (WCP/WHP) ............ 20-22
Maintenance and Troubleshooting .................... 23-26
Test Unit Performance Data .................................. 27
Warranty ............................................................... 28

TABLE OF CONTENTS

Specific Unit Installation

TM

Содержание CCP/CHP





























Отзывы: