EMI CAC_36, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 52

www.enviromaster.com
Cassette Air Handler
14
High Volt Electrical Wiring
2. Secure the cable.
3.
Refer to the wiring diagram (see follow
-
ing page) to connect the ground wire to
the ground lug.
1. Route the cable through the appropriate
hole in the control box for the High Volt
electrical wiring.
high Volt Electric Cable
low Volt Electrical
Connections
CASSETTE AIR HANdLER INSTALLATION INSTRUCTIONS
Electrical Wiring-
Continued
4. Slide cover up and out to remove.
5. The rating plate is located on the outside
of control box cover (see low Volt inter-
connecting Wiring section for location of
wiring diagram).
6. Check the unit rating plate for circuit
ampacity and breaker or fuse size.
Use
only HACR type breakers. Select the
proper wire for the ampacity rating.
7. Each unit must have a separate branch
circuit protected by a fuse or breaker.
Refer to the unit rating plate for the
proper wire and breaker or fuse size.
8.
It is also recommended that a local dis
-
connect switch be connected within 3’
of the unit. In some areas this may be a
code requirement.
3. Remove
the 4 screws
securing the
c o n t r o l b o x
cover.