EMG ELDROclassic Ed 121/12 Скачать руководство пользователя

Страница: 57 / 74

Notes on operation

Check of operating conditions before commissioning

7.1

EMG-MA-Ed23-Ed630-V2_EN_T.Nr.344029.docx

/ 74

Never operate the ELDRO

device with defective or inoperable elec-

trical connections.

The terminal box must be kept closed at all times. Access may be
granted only to authorised personnel with corresponding training and
safety instruction.

In the event of failures on the energy supply, the ELDRO® device
must be shut off immediately.

7.1

Check of operating conditions before commissioning

NOTE

A bag (silica gel) is placed into the terminal box on delivery ex-fac-
tory, which serves to absorb any potentially arising moisture.

This bag (silica gel) must be removed before commissioning.

−

The ELDRO

device is assembled and connected according to the

specifications (

⇒

Section "Assembly and installation").

−

The permissible voltage and frequency tolerances are kept

(

⇒

Chapter "Technical data", Section "Voltage and frequency toler-

ances").

−

The ELDRO

device is filled with the operating liquid according to

the conditions of use (

⇒

Chapter "Technical data", Section "Ambi-

ent temperature and altitude of setup site") and according to the

model variant, and it is filled to the required level (

⇒

Chapter

"Maintenance", Section "Operating liquid").

−

The ELDRO

device is protected against contaminations

−

The mounting bolts on the thrust shackle and the base mounting

are secured against accidental movements (e.g. by means of

safety splinter pins).

−

The axes are arranged in parallel to each other.

Содержание ELDROclassic Ed 121/12











































































Результаты поиска

Содержание ELDROclassic Ed 121/12

Отзывы:

Похожие инструкции для ELDROclassic Ed 121/12

Бренды по названию

Популярные бренды

EMG ELDROclassic Ed 121/12, Руководство по сборке

Результаты поиска

Содержание ELDROclassic Ed 121/12

Отзывы:

Похожие инструкции для ELDROclassic Ed 121/12

Бренды по названию

Популярные бренды