User Manual
Document no. / rev.: ROX000337352_AE
Hydraulic Retrieval Tool
3
1. INTRODUCTION
1.1
Disclaimer
This document or any part of its content can not be reproduced or distributed in any way or means for
any purpose without the written approval from Roxar Flow Measurements AS. The document is under
Emerson Electric copyright protection ©2016 Emerson Electric Co. All rights reserved.
1.2
Purpose and scope
Roxar provides safe and high quality products and services to meet the demands and requirements
from our clients. As part of this approach we are issuing user manuals and work instructions like this
document to ensure that all activities related to installation and operation of Roxar equipment is
performed in a safe and reliable manner.
The purpose of this user manual is to ensure a good understanding on how the Hydraulic Retrieval
Tool kit is operated and maintained. This user manual also describes how the retrieval operation is
performed on pressurized systems, with focus on the safety aspect of the operation. It is crucial that a
retrieval tool operator has the required competency and up-front training needed to perform this work
safely.
This user manual describes any work performed from a strictly general point of view so any particular
application, installation or process needs to be evaluated as specific cases and adapted to under the
responsibility of the operator. If there is any need for further clarifications, please contact your regional
Roxar/Emerson representative.
In this user manual, the following products are covered:
Hydraulic Retrieval Tool (both versions: 6000psi and 10000psi)
Service Valve (both versions: 6000psi and 10000psi)
Air / Hand Pressure Pump
For details on mechanical access fittings, covers and plugs, reference is made to the
Hydraulic Access
System User Manual
which should be consulted for more detailed understanding of the access system
main components (access fitting, plug and cover).
1.3
Warnings
Instructions and procedures in this document may require special precautions to ensure the safety of
the personnel performing the operations. Information that potentially raises safety issues is indicated by
a warning symbol followed by a safety message:
With a detailed Safety Message
Before any operation or work preceded by the warning is initiated it is important that the safety
message(s) are understood and fully adhered to.
