Emerson Rosemount ET310, Быстрый старт

Страница: 7 / 52

1.3 Required tooling
Separate tooling for Strap option
Tooling is supplied in the IK220 installation kit.
• Tin snips (used to cut the fixing strap to the correct length)
• Flathead screwdriver or wrench and socket (to tighten the fixing strap)
• 2.5 mm hex key (for power module retaining bolts)
Tooling required for magnetic fixture
• Torque wrench with 13mm A/F deep socket
• 13mm A/F spanner
• 6mm A/F hex key
• 2.5mm hex key (for the power module retaining bolts)
1.4 Alternative installation options
Optional tooling
If preferred, an electric screwdriver or wrench may be used instead of the
supplied tools to decrease installation time. This is not included in IK220
installation kit
Alternative shoe
The standard strap mount sensor (order option B01) is suitable for pipes
from Nominal Pipe Size NPS 4 to NPS 40. If the sensor is to be installed on a
pipe with a smaller diameter, an alternative shoe should be ordered which is
designed to fit pipes down to NPS 2. For further information, consult your
Emerson representative.
January 2022 Quick Start Guide
Quick Start Guide 7