Emerson Rosemount ET310, Быстрый старт

Страница: 21 / 52

position of the metal plate on top of the spring through the plus-
shaped (+) cut -out on the side of the tensioner. The correct tension
is set when the plate is aligned with wide part of the middle of the
cut-out as shown in the images below. As the tensioner is tightened
ensure the sensor(s), strap and strap tensioner remain in-line.
WARNING
Take special care not to put fingers under the bolts of the tensioner
while the strap is being tensioned.
Figure 3-5: Alignment examples
A. Correct tension – plate is aligned with the wide part of the cut-
out
B. Incorrect alignment – tighten strap
C. Incorrect alignment – loosen strap
January 2022 Quick Start Guide
Quick Start Guide 21