Emerson Rosemount ET310, Быстрый старт

Страница: 30 / 52

Figure 4-6: Waveform quality
A. Good waveform
B. Bad waveform
4. Ensure that the measured thickness matches expectations.
5. If the waveform is poor quality, move the sensor a little and wait for a
new waveform to download. Once there is a good quality waveform,
use a permanent marker to mark the vessel at the 4 slot locations of
the brackets as displayed in
Figure 4-7 (the four red marks at the top
and bottom of the sensor).
Figure 4-7: Marking the position of the sensor
Quick Start Guide January 2022
30 Emerson.com/Rosemount