Emerson Liebert PEX+ Series, Руководство пользователя

Страница: 44 / 92

36 Chapter 5 iCOM Controller
Liebert. PEX+Series Precision Air Conditioner User Manual
Parameters Default Setting range Description
S168 BACKDRFT No No,Yes Fan Back Draft Control
S169 VSD BDR 1.5V 0.1 - 5.1V VSD Set point BACK DRAFT
S171 NO BDR 1 3.5V 0.0 - 5.0V Not Selectable Zone 1
S172 NO BDR 2 0.0V 0.0 - 5.0V Not Selectable Zone 2
S173 BDR SOFF No No, Yes Stop BDR when System is Off
S174 REM BDR Off Off,BDR Remote Off at BDR
S175 DISP BDR Off Off,BDR Display Off at BDR
S176 BMS BDR Off Off, BDR BMS Off at BDR
S177 LOC BDR Off Off,BDR LOC Off at BDR
S179 CtrlType no Tight, Std, no SCR Control Type
S180 Co1 on 0% -100/+100% Start 1st Compressor at
S181 Co1 off -200% -200/+50% Stop 1st Compressor at
S182 Co1 TD 20 min 0 - 30 min 1st Compressor stop delay
S183 Co2 on 100% -100 / +100 % -
S184 Co2 off 0% -200 / +50 % -
S185 Co2 TD 0 min 0-30min -
S186 CycleT 20 sec 1.0 - 200.0 sec -
S187 SCRFact 1.0 1.0-10.0 -
S188 Act SCR - 0-100% -
5.7.3 STANDBY
The parameters of the STANDBY menu are described in Table 5-12.
Table 5-12 Descriptions of STANDBY parameters
Parameters Default Setting range Description
S502 #STANDBY 1 0 ~ 31 Number of standby units
S503 ROTATION Daily
No, Daily,
MON ~ SUN,
M - MON ~ M
- SUN
Rotation frequency setting of the running and standby units. Range:
Daily: rotate once a day.
MON ~ SUN: rotate once a week. The rotation occurs on Monday ~ Sunday
of the week. For example, MON means rotation occurs on Monday of every
week.
M - MON ~ M - SUN: rotate once a month. The rotation occurs on Monday ~
Sunday of the first week of the month. For example, M - MON means rotation
occurs on Monday of the first week of every month
S504 ROT HOUR hr - Used to set the hour of the detailed time while rotation
S504 ROT MIN min - Used to set the minute of the detailed time while rotation
S505 ROT BY 1 1 ~ 8 The unit number for a rotation
S506 STBY FT 1 min 1 - 5 min Stdby Fan Timer at Reheat/Hum
S507 DO ROT No Yes, No Perform one rotation
S508 CASCADE No
CO/HE,
Cool, Yes,
No
Cascade function selection.
‘Yes’ corresponds to temperature and humidity
control and
‘no’ corresponds to closing the cascade
S509 CAS DEL 5 min 0 - 30 min Cascaded Units Delay
S510 CAS QUI 2 min 0 - 30 min Cascaded Units Quick Start
S511 CAS MIN 30 min 2 - 360 min Cascaded Units Min Run
S512 CAS CTRL 5 min 0 - 30 min Cascaded Units Control Delay
S513 STBY HT No
0 = No
1 = Yes
Start all Standby Units by HT
5.7.4 WELLNESS
The iCOM controller calculates the bonus and penalty over the equipment maintenance based on the parameters in
the WELLNESS menu and the equipment operation historical data, so as to find out the next system maintenance
time.
Informing the maintenance personnel of the maintenance time makes the air conditioner run in the optimal mode,
which reduces the chances of faults and raises the system reliability.