6 Chapter2 Instructions for Installation Preparations
Liebert. PEX+Series Precision Air Conditioner User Manual
Figure 2-2 Inserting and movement
When moving the indoor unit, keep the obliquity within the range from 75° to 105°, as shown in Figure 2-3
10
5
75
Figure 2-3 Moving obliquity of indoor unit
2.4.2 Unpacking
Move the equipment to the place closest to the final installation site and then unpack it.
Follow the procedures below for unpacking:
1. Remove the side panels and top cover
Liebert.PEX+ series air conditioner uses the international packaging. You can use a hammer or straight screwdriver to
straighten the connection hook that connects the side panels to the top cover, as shown in Figure 2-4.
Figure 2-4 Straightening the hook
At first, straighten all the hooks that fix side panel I, and remove side panel I. Then straighten all the hooks that fix side
panel II, and remove side panel II. At last remove top cover III, as shown in Figure 2-5 .
