Emerson AVOCENT Скачать руководство пользователя

Страница: 48 / 60

.....

Avocent® Matrix High Performance KVM Switching System

Info Tab

The Info tab displays some information about the receiver and switch you are connected to. This

information can be useful for troubleshooting.

The following table describes the information available on the Info tab.

Field

Description

Name

The name of the receiver you are logged in to.

Firmware Version

The firmware version of the receiver.

Hardware Version

The hardware version of the receiver.

Part Number

The part number of the receiver.

EID

The electronic ID of the receiver.

Serial Number

The serial number of the receiver.

Switch Name

The name of the switch the receiver is connected to.

Switch EID

The electronic ID of the switch.

Switch IP address

The IP address of the switch.

Switch Port

The port on the switch where the receiver is connected.

Info Tab Descriptions

Diagnostics Tab

The Diagnostics tab is used for debugging, but also contains general information about the receiver

and allows you to reset a receiver or a transmitter.

To reset the receiver, click

Reset Receiver

. The reset option is similar to a power cycle.

To reset a transmitter, you must have a KVM session connected from your receiver to the

transmitter you wish to reset. When you click

Reset Transmitter

, it resets the connected transmitter

and is equivalent to powering the transmitter off and back on. You might reset a transmitter if there

was no keyboard/mouse function after connecting.

NOTE:

Resetting a transmitter may affect other users if they are connected to the same transmitter in a

shared session.

The adjust video button is for setting the VGA parameters of the transmitter.

The Video Parameters and USB Parameters links are used by Technical Support for

troubleshooting.

Содержание AVOCENT





























































Результаты поиска

Содержание AVOCENT

Отзывы:

Похожие инструкции для AVOCENT

Бренды по названию

Популярные бренды

Emerson AVOCENT, Руководство пользователя

Результаты поиска

Содержание AVOCENT

Отзывы:

Похожие инструкции для AVOCENT

Бренды по названию

Популярные бренды