Emerson AVOCENT, Руководство пользователя

Страница: 29 / 60

On-Board Web Interface .....
23
To reboot a device:
1. From the Devices tab, select one or more devices and click Reboot .
2. Click
Reboot
to confirm. The status of the device will change to reboot pending, offline and
then back to ready when the device completes rebooting.
Remove device
Devices that are no longer being used can be removed from the Matrix switch.
To remove a device:
1. From the Devices tab, select one or more devices and click Remove .
2. Click Remove to confirm. The device will be removed from the list.
Remove offline
All offline devices can be removed by using the clicking Remove Offline - Remove . This provides a
convenient way for you to clean up your list of devices after one or more devices have been
physically removed from the system.
Flash display
The LCD display can be set to flash to help locate a transmitter, receiver or switch.
To flash the LCD display:
Select one or more devices, then click Flash in the sidebar. You will be prompted to enter the length
of time to flash the backlight.
NOTE:
A value of zero can be used to stop a backlight that is currently flashing.
Switch details
When in the Devices tab, if you select a switch, you will be able to view and edit options for the
switch including the mode, attributes and the IP address. The options you can edit depend on
whether the switch is the master (the one you are logged into), a slave, or a switch that belongs to a
different cascade system. All options are editable on the master. Some options are editable on a
slave. No options are editable on a master or slave that belongs to a different cascade system.
Switch mode
You can change the mode of the switch you are logged in to by changing the cascade participation
setting. Changing from master to slave or slave to master has significant implications. If you change
a switch from master to slave or slave to master, the switch will automatically reboot to effect the
change.