Emerson AVOCENT Скачать руководство пользователя страница 52

Страница: 52 / 60

.....

Avocent® Matrix High Performance KVM Switching System

Extended Mode Receiver Settings

The following table describes the options available on the Settings - Receiver tab for Extended

Mode.

Option

Description

USB Mode

Type of USB devices that are allowed for use with this receiver.

LCD Backlight

Option to turn the LCD backlight on or off.

Video Scaling

Option to determine whether video from the transmitter will be scaled
to the monitor connected to the receiver.

Audio Output

Option for enabling audio at this receiver.

Microphone

Option for microphone input for this receiver.

Keyboard Auto
Enumerate

If enabled, the keyboard will be re-enumerated when connected to a
target.

Mouse Auto Enumerate

If enabled, the mouse will be re-enumerated when connected to a
target.

OSD Inactivity Timeout

The timeout, in minutes, after which the OSD display disappears.

Hotkey

The system default hotkey for activating the OSD display.

Settings - Receiver Tab Extended Mode Options

Содержание AVOCENT





























































Результаты поиска

Содержание AVOCENT

Отзывы:

Бренды по названию

Популярные бренды

Emerson AVOCENT, Руководство пользователя

Результаты поиска

Содержание AVOCENT

Отзывы:

Бренды по названию

Популярные бренды