Emerson AVOCENT, Руководство пользователя

Страница: 28 / 60

22
..... Avocent® Matrix High Performance KVM Switching System
Devices Tab
From the Devices tab, you can manage switches, transmitters and receivers. This includes viewing
and changing settings, updating firmware, and resetting to factory defaults. The current list of
devices known to the master switch (including itself) is shown in the upper Devices pane. When a
new device is physically connected to a switch in the system, it will automatically appear on the list.
If a device is physically removed from the system, it will still appear on the list but will show a status
of Offline. Settings for that device are retained in the master switch. If the device is connected again
in the future, its settings will be pushed from the master switch down to the device.
Restore defaults
The restore full defaults option will restore the complete factory default settings to the device(s)
selected.
The restore partial defaults option applies only to switches. This will restore the factory default
settings with the exception of the network settings. Network settings are excluded so that you do not
have to reconnect to the switch using a potentially different IP address.
Update firmware
The update firmware option updates the firmware for the device(s) selected. Firmware can be
updated using FTP, HTTP, HTTPS, TFTP, or a local file. Firmware update files are not retained
when power is removed or the switch is rebooted.
NOTE:
You can select multiple devices to be updated, but you must select devices of the same type.
To update the firmware:
1. From the Devices tab, select one or more similar devices and click Update .
2. If the desired file is already stored in the switch, select the file from the list of existing files.
-or-
Select a source for the new file and provide the necessary details as prompted.
3. Click Proceed to proceed with the firmware update. Progress can be seen by watching the
status column on the list of Devices pane. The final completion status is logged to the Events
tab.
Reboot device
One or more devices can be rebooted remotely from the Devices tab.