Emerald Home 3, Паспорт и руководство по эксплуатации

Страница: 15 / 33

14
6. OPERATION OF THE DEVICE
Important! After connecting the EMERALD device it is necessary to familiarize yourself
with the operating rules.
Fig. 14. Internal elements of the EMERALD device
1 — inlet of unpurified cold tap water; 2 - output of purified antioxidant water; 3 - water flow
regulator; 4 - catalytic filter; 5 - electrokinetic filter; 6 - electrochemical module (the main
component of the EMERALD device); 7- monitoring and control unit; 8- hydraulic input for
citric acid washing solution; 9 – flushing mode on / off button; 10 - plug for flushing device
connection; 11- flushing device..
Important! Do not use for food or drinking purposes the first 30 liters of the purified
water immediately after connecting the device. In the case of prolonged downtime of the
device (more than 1 day) then the first 30 liters of purified water shall also be discharged.
When you turn on the EMERALD for the first time it is necessary to adjust the speed of
the purified water flow (see the “Setting the Flow of Water” section).
The device is intended for the purification and electrical treatment ONLY OF COLD
WATER FROM CENTRALIZED WATER SUPPLY SYSTEMS! When the OPERATION
mode of drinking water is activated then it is not allowed using warm or hot water through
the device as this may damage it.
Do not use the device for purification of microbiologically unsafe water or water of
unknown origin without the proper preliminary filtration and disinfection.