Emerald Home 3, Паспорт и руководство по эксплуатации

Страница: 12 / 33

11
Connection to cold water supply line.
Fig. 8 Connection to cold water supply line
u
Shut off the flow of cold water to the sink and then open the cold water tap on the mixer tap
to drop the pressure in the tube;
u
Insert / screw the tee with the ball valve into the gap between the cold water supply and the
flexible piping of the mixer tap, see (Fig. 9). Seal the threaded joints if necessary.
u
Unscrew the nut on the tee and put it on the connecting tube;
u
Put the tube tightly on the tee fitting and tighten the nut;
u
Check the reliability of all connections.
Attention! During the connection of these elements do not
overtighten the connections! It can lead to the fracture of the tee or tap,
including – hidden fracture (with long-term consequences). The amount
of used waterproofing material (fluoroplastic tape and etc.) should not
be excessive! Contact a professional plumber to install these items in
the cold water pipeline. In the case of any mechanical damage of the
junction point providing that it has been improperly installed and used
then the warranty claims might be rejected.
Fig. 9 Ball valve tee with
tap regulating the water
supply