Emco compact 8, Инструкция / Перечень запасных частей

Страница: 17 / 57

Box with turning tools
This box contains 6 ground turning tools:
1 roughing tool (roughing cuts)
1 side cutting tool RH (for finish turning)
1 parting-off tool (for grooving and parting-off)
1 inside turning tool (for boring)
1 internal thread cutting tool, 60
°
thread angle
1 external thread cutting tool, 60
°
thread angle
Four-way Tool Post
It is mounted on the top slide and allows four tools to
be clamped. Any of the tools can be swung into the
cutting position. It is essential to loosen the hex hea­
ded nut before swinging the tool. Thereafter tighten.
Chip Guard
Travels with the tool and protects the operator from
flying turnings. It is also sufficient protection against
damage from a tool breaking in use.
Change Gears for the COMPACT 8
Th is accessory consists of 8 gear wheels and a
distance ring.
With these wheels the following threads can be cut:
Metric from 0,4mm-3mm, module from M 0,2 - 0,4,
and ir.ch from 44 threads per inch to 10 threads per
inch.
For detailed instructions of mounting and using see
pages 11 and 12.
16