Emco compact 8, Инструкция / Перечень запасных частей

Страница: 15 / 57

LATHE ACCESSORIES
Universal Lathe Chuck, 3 or 4 jaw design
Using these Universal Chucks, cylindrical or symme­
trically profiled work pieces (round stock, triangular,
square, hexagonal, octagonal or twelve-cornered stock)
can be clamped.
NOTE: New lathe chucks have very tightly fitting jaws.
This is of vital necessity to ensure accurate clamping
and a long service life. Due to repeated opening and
closing the jaws adjust themselves automatically and
their operation becomes progressively smoother. For
greasing, we recommend Molykote Paste G.
4-Jaw Independent Chuck (0 150mm)
This special chuck has 4 independently adjustable chuck
jaws .These permit the holding of asymmetrical com­
ponents and enable the accurate setting up of cylindrical
components.
Drill Chuck
With its three self-centring jaws it is used for holding
centring drills and twist drills.
Morse taper arbor
The arbor is necessary for mounting the drill chuck in
the tailstock or vertical attachment spindle. It has a
No. 2 morse taper.
Live centre
The live centre is mounted on 3 ball bearings. Its use is
highly recommended for turning at speeds in excess of
500 rpm.
14